Wireless Receiver (16 channel)

Our intruder spray system is used in over 20 countries worldwide to protect  businesses from theft, and (when coupled with wireless transmitters) wireless receivers make the entire system easier to install and less of a potential eyesore.

This is because it eliminates the need for the individual system components to be linked through wiring. Go wireless to avoid extensive installation work and unsightly wires trailing through your premises.

Should you decide to purchase our wireless spray system, you can rest assured the system will be maintained with high-spec equipment. This EE4216MR wireless receiver allows you to add up to 16 transmitters and six outputs to any application.

Specifications

• Dimensions: 165mm x 89mm x 25mm (6.5" x 3.5" x 1")
• Weight: 280 g (.62 lb)
• Operating environment: -10° to 60°C (14° to 140°F), 90% relative humidity, non-condensing
• Power requirement: 11 - 14 VDC; 400 mA
• Current consumption: Approx. 400 mA
• Output specifications: Form C relay 1A @ 28 VDC, 0.5 @ 30 VAC resistive load
• Input specifications: A low is less than .5 V; a high is greater than 2.5 V. Reset input:
• Contact closure, momentary low
• Receiver type: Frequency hopping spread spectrum
• Operating frequency: 868-869 MHz
• Tamper: Type B, fixed device
• Number of points/Transmitters: 16
• Number of outputs: Six Form C relay outputs
• Event history log capacity: 50 events (first-in, first-out replacement)

The EE4216MR is compliant with:

• EN50131-1
• Security Grade 2
• Environmental Class II

Please note: wireless receivers work in conjunction with wireless transmitters and wireless panic buttons.

To find out more about how the SelectaDNA Spray System works call : +1 865-935-8518